OFFICIAL AIRGUN 101 SHOP FOR THE EU - BREXIT - CUSTOMER PAYS EU IMPORT VAT + DUTY

Saber Tactical - FX Maverick / FX Wildcat MK3 - Cheek Riser Install Guide

Saber Tactical Cheek Riser

Install Guide

Maverick / Wildcat MK3 Rail

Before starting any work on any rifle or pistol always ensure the weapon is unloaded and set to safe.
This part is a home install. Any damage, stripped threads or damage in anyway is entirely the customers responsibility. Airgun 101 Shop does not offer after any sales install service.

 

 

  1. The package contains, one cheek piece, one mounting plate, two rounded ( larger of the two ) screws and two small flat head screws. The may arrive part assembled, you will need to disassemble to install.

 Saber Tactical - FX Maverick / Wildcat Cheek Riser Contents

  1. Remove the existing cheek piece using an alan tool – not supplied. Store this for future use along with the screws.

 Saber Tactical - FX Maverick / Wildcat Cheek Riser - Remove Existing Screws

  1. Find the two holes on the top that the plate is going to line up with. The plate MUST NOT bridge the gap for the magazine, it will be on the rear of the block. The screw holes for the cheek riser adjuster must go on the right hand side / magazine side of the block.

 Saber Tactical - FX Maverick / Wildcat Cheek Riser Line up top holes

  1. Using the two small flat head screws go ahead and fix the cheek riser plate to the block. Using a 2.5mm alan tool – not supplied

 Saber Tactical - FX Maverick / Wildcat Cheek Riser Tighten Down Top Plate

  1. Line up the cheek piece with the cut holes and the holes for the screws on the side of the mounting block. Then GENTLY rotate the cheek piece until it clips over the screw holes on the side and sits flat on top of the cheek rise plate. Basically you have to gently twist the cheek piece over the top with the holes lined up on the side. If you snap this part it will not be replaced by the retailer.

 Saber Tactical - FX Maverick / Wildcat Cheek Riser - Line up side holes

Saber Tactical - FX Maverick / Wildcat Cheek Riser Twist Cheek Riser

Saber Tactical - FX Maverick / Wildcat Cheek Riser - Clip into place

  1. Then go ahead and use the two rounded screws and set the desired height and pinch down. These screws do not need a huge tightening, just a pinch.

 Saber Tactical - FX Maverick / Wildcat Cheek Riser - Final Screw tighten 

© 2024 Airgun101ShopEU,

    • American Express
    • Diners Club
    • Discover
    • Mastercard
    • PayPal
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account